Gluesticks

how do i get dried glue (from a hot glue gun) iff if my glass desk?

yeah it's a large sheet of glass over my desk

Public Comments

1. I'm guessing you are talking about a large sheet of glass on the desk top.....if so...it's easy to use a razor blade scraper and the glue will pop right off. Even with hot glue...it is still a water based glue...just thicker. So if all else fails....lay a wet rag on top of it and leave it on over night. The glue will soften up and can be removed with blade easier.
2. You may want to try nail polish remover and if that doesn't work, go to the nearest drugstore and get some Goo Be Gone.
3. Use the empty, hot glue gun pointed tip to re-melt it and scrape it off while it is hot. If there is residue, you may have to scrape it off carefully with a razor blade. But be careful, it can scratch the glass if you don't keep it flat or if you press too hard.
4. I use hot glue allot.and in most cases I have just peeled it of my work top after it drys,,hot glue doesn't bond very well on smooth surfaces..if you do use a razor blade be careful not to scratch the glass....with all due respect to.. extex_co..